BEST 3D PRINTER HOT END

There is always a perfect best 3D PRINTER HOT END out there in the market for you. However, you may not have the time and resources to try and research each of them in detail. So we’ve done the heavy lifting and are sharing below our detailed review of Top 10 best 3D PRINTER HOT END.

10 Best 3D PRINTER HOT END

IMAGE PRODUCT RATING PRICE
1. Sovol Creality Upgrade Parts Assembled Extruder Hotend with Capricorn Bowden...
2. FYSETC 3D Printer Robo Parts Original Hexagon Hotend Extruder Kit All Metal...
3. CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8...
4. Maxiwatt Hotend for Printer 3D - The hot end Cylinder Heater Core +...
5. Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2...
6. 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W...
7. Phaetus Dragon Hotend 3D Printer Accessories Dragon All Metal Hotend Standard...
8. Kee Pang All-Metal V6 J-Head Hotend Extruder Hotend kit with 2 pcs Stainless...
9. Maxiwatt Hotend Original for Printer 3D - The hot end Cylinder Heater Core +...
10. Creality Original 3D Printer Extruder Assembled MK8 Hot End Kit for Ender...

Best 3D PRINTER HOT END

Sovol Creality Upgrade Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover×3 and 0.4mm Nozzle×3 for Creality Ender 3 Ender 3 pro 3D Printer, Not for Ender 5

 in stock
1 new from $21.99
Free shipping
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work for the same functions as the golden ones.
  • Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
  • With more terminal housing and pins as spare parts, in case fail installation and waste .
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.

FYSETC 3D Printer Robo Parts Original Hexagon Hotend Extruder Kit All Metal Set with 0.4mm Nozzle 100K Thermistor Heatsink Wire for Robo R1 1.75mm Filament 12V

 in stock
1 new from $28.99
Free shipping
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • Original Robo Printer DIY parts, replacement accessorie; This hotend is a replica of popular Robo Printer's hotend, but will not work with R2, R2 hotend need 24V, this hotend is 12V.
  • The hotend assembly is equipped with 100Kohm thermistor, heat sink cable; size nozzle replacements is MK8 nozzle.
  • All metal design, no PTFE in hot zone - capable of printing high temperature melting point plastics such as nylon and polycarbonate. Using the latest technology stainless steel, working hours up to several hundred hours, strong wear resistance.
  • Voltage:12V, The extruder is direct drive with very little or no room for the filament to wiggle after being pushed into the hotend.
  • After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits (with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm) fit for Creality 3D Printing Printer CR-10 CR-10S CR10S5

 in stock
1 new from $35.99
Free shipping
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)

Maxiwatt Hotend for Printer 3D - The hot end Cylinder Heater Core + THERMISTOR + Block Circular - Block Heater - Heat More Precise REPRAP EXTRUSOR 24V 40W

 out of stock
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • Introducing the new Hotend for 3D FDM printers with a cylindrical shape. The Cylinder Heater by Maxiwatt has been redesigned from scratch to get better results in your 3D printers and even faster printing speeds. Compatible with PVA, PLA, ABS, Nylon, Flex, etc. filaments. It will improve your results. Aluminum Heater for 3D printers (Hotend). Cylinder Heater Core
  • Excellent Materials: Made of aluminum body, with a circular shape of 20.00mm diameter and 10.00mm height.
  • For multiple variety of filaments: Compatible with filament PVA, PLA, ABS, Nilon, Flex, etc. You will get less blockade in the neck and nozzle by maintaining a more constant temperature.
  • Constant and uniform temperatures: Our cylindrical heater distributes the heat evenly and precisely. At the same time the NTC 100K thermistor included in the interior of the block, get more accurate readings than in other systems where it is installed further away.
  • Simple installation: The installation in your 3D printer is very simple. By default is of metrics M6 compatible with the majority of the 3D FDM domestic and professional printers such as Prusa i3. In a few seconds you can start heating the system. However, it´s recommended, that like with any modification in your machine, perform the relevant checks.

Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm

 in stock
2 new from $63.50
Free shipping
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 Pro / Ender 5 / TronXY X5S
  • Orifice size: .4mm
  • Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock
  • This is a Drop in All Metal Conversion Kit for Creality printers
  • Made in USA by Micro Swiss

3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro with Silicon Cover and 0.4mm Nozzles

 in stock
1 new from $15.99
Free shipping
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)

Phaetus Dragon Hotend 3D Printer Accessories Dragon All Metal Hotend Standard High Flow Rate Extruder Compatible with Prusa I3 MK3 Titan Extruder BMG Extruder (High Flow in Blue)

 out of stock
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • Good insulation effect with an ultra-thin wall thickness as thin as 0.1mm, realizing an excellent thermal insulation
  • All metal kit with overall high temperature resistance up to 500 degree
  • The Inner hole roughness of nozzle and heatbreak Ra0.4, which allow a more smooth movement of filament,resulting a higher resolution prints
  • Increased rigid support structure guarantee the heatbreak remaining intact under the impact of external force
  • Integral frame rigid structure makes Nozzle replacement more convenient without grasping the heatblock

Kee Pang All-Metal V6 J-Head Hotend Extruder Hotend kit with 2 pcs Stainless Steel Nozzle Throat + 5 Pcs Brass Printer Nozzles for E3D V6 Makerbot RepRap 3D Printers

 out of stock
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • 100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement
  • High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly
  • Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
  • Easy to install: NTC connector with terminal, you can install directly
  • Compatibility: Compatible with all 1.75mm V6 3D printer

Maxiwatt Hotend Original for Printer 3D - The hot end Cylinder Heater Core + THERMISTOR + Block Circular - Block Heater - Heat More Precise REPRAP EXTRUSOR 12V 30W

 in stock
1 new from $18.90
Free shipping
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • Introducing the new Hotend for 3D FDM printers with a cylindrical shape. The Cylinder Heater by Maxiwatt has been redesigned from scratch to get better results in your 3D printers and even faster printing speeds. Compatible with PVA, PLA, ABS, Nylon, Flex, etc. filaments. It will improve your results. Aluminum Heater for 3D printers (Hotend). Cylinder Heater Core
  • Excellent Materials: Made of aluminum body, with a circular shape of 20.00mm diameter and 10.00mm height.
  • For multiple variety of filaments: Compatible with filament PVA, PLA, ABS, Nilon, Flex, etc. You will get less blockade in the neck and nozzle by maintaining a more constant temperature.
  • Constant and uniform temperatures: Our cylindrical heater distributes the heat evenly and precisely. At the same time the NTC 100K thermistor included in the interior of the block, get more accurate readings than in other systems where it is installed further away.
  • Simple installation: The installation in your 3D printer is very simple. By default is of metrics M6 compatible with the majority of the 3D FDM domestic and professional printers such as Prusa i3. In a few seconds you can start heating the system. However, it´s recommended, that like with any modification in your machine, perform the relevant checks.

Creality Original 3D Printer Extruder Assembled MK8 Hot End Kit for Ender 3/Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

 in stock
1 new from $15.99
Free shipping
VIEW ON AMAZON
Amazon.com
as of April 1, 2021 10:34 am

Features

  • 100% original and high quality 3D Printer accessories for Creality Ender 3
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W
  • Tip of the nozzle, aluminum heating block, throat pipe
  • Suitable For Creality ender 3