Below is the top 10 best LEATHER PARING MACHINES review to guide you to buy the best product. Choose one of these products and your satisfaction is guaranteed!
10 Best LEATHER PARING MACHINES
Best LEATHER PARING MACHINES
LianDu Leather Paring Machine Leather Splitter Skiver Peeler Leather Peeling Machine DIY Leathercraft Tool（US Stock）
- ▶ Upgraded stainless steel wheel nylon wheel, no longer worried about damage，upgrade folder for quick blade replacement mode, change blades in one step.
- ▶ Easy installation, all the parts after computer work planning, laser cutting, with precision.
- ▶ Flexible as long as there is a small piece of flat work surface can be used. The use of energy, through the reasonable design of part angle coordinate
- ▶ Easy to maintain: the whole machine adopts aluminum bracket, stainless steel screws, stainless steel holder, don't have to worry about the rust problem.The most commonly used double-sided razor blade, cutting tool and three holes blade support most of the industry.
- ▶ Package Included: 4 x bracket; 1 x semicircle measuring tape; 8 x Retention tab; 5 x plastic cover; 15 x screws; 2 x wrench; 1 x screwdriver; 1 x G Clamp; 1x Blade.
YaeTek Manual Leather Skiver Leather Splitter Leather Paring Machine Leather Craft Edge Skiving Machine with 18 Blades
- YaeTek Manual Leather Skiver Has Strong Metal Construction;
- This Leather Skiver has a good trimming performance;
- This Leather Sparing Machine is Very Easy to use, no matter you are a new or a professional, you can use it easily;
- Good quality and High safety
- Package Included :1 x leather splitter, 18 x blades ,3 x special roller ,1 x spanner
Leather Skiver Splitter Machine, Manual Craft Leather Skiving Thinning Paring Machine, Hand Craft Edging Leather Peeling Machine Leather Peel Tool Kits
1 used from $91.65
- [Usability]--Suitable for paring around the edges of square leather pieces or entire leather strips. It makes the edge thin.,which can be limited in width and cut off.
- [Working size]--The blade width is 35mm,so it will be better if the leather width is smaller than 35mm,the length no limited, cutting thickness no limited.,this leather paring machine is provided with 3 roller cylinders of different widths -4,8 and 12mm to make it capable of paring even narrow pieces.
- [Simplicity]--Easy to operate,everyone can use.This machine can be used without self-assembly and repeated sharpening. It uses the daily double-sided razor blade, which can be replaced at any time.
- [Adjustable and Good stability]--It is easily adjustable for the thickness and angle desired,it allows the paring of leather to become quite easy ,edge paring and corners are a breeze to undertake and because it is very precise,preparing onlays and inlays become easy tasks,precise structure much increases the accuracy of paring.
- [Application]:--Used for skiving the soft leather (Hard vegetable tanned are included in hardness leather; soft leather includes soft vegetable tanned includes chrome tanning,POAM UP PU,sheepskin, cowhide ).It can also use on belt, strap,card,fold ...
Podoy Leather Splitte Machine Craft Edge Kits Manual Repairing Splitter Skiver Peeler Tool DIY Premium Leather Paring Skiving Machine
1 used from $44.15
- 【 Leather Skiving Machine】:Manual Leather Skiver Craft Edge Skiving Machine Leather Paring Machine Splitter Skiver Peeler Tool
- 【 Easy To Install】: After you received the machine, please fix the machine, then use the M3 hexagon screwdriver to install a new peeling blade, then set the height adjustable nut to the appreciate position before starting peeling , rotary turret angle, can achieve a different peeling effect. The machine uses the traditional double-sided razor blades or three-hole industrial blade, the replacement is convenient, it is the beat choice for you.
- 【Replaceable Blade Holder Design】: The blade can be easily replaced at any time. there are two blades to choose from the traditional double-sided razor blades, as well as stainless steel three-hole industrial blade). in addition. the turret angle can also arbitrary rotated, in order to achleve pertect peeling errect
- 【Rollers】: Equipped with 4 different sizes of rollers to choose from,In order to achieve different peeling widthAdjusting the height of theroller up and down easily, can achieve a different thickness of the skin thinning,The large turret space designextends yourpeeling range.
- 【Package includes】:1 pc leather splitte machine,3 pcs roller ,4 pcs blades,3 pcs wrench，1 pc wooden handle skiver
Leather Paring Machine Manual Leather Skiver Leather Splitter Skiver Leather Tool DIY Skiving Thinner Machine
- 【BLADE WIDTH】2.2''-2.4'' blade width (Generally no more than 2'' cut leather as well, the best initial leather thickness is not exceeding 0.24'')
- 【MAIN PARAMETERS】Style: Installed directly use style; Machine dimension: 7'' x 3'' x 2''); Package size: 9'' x 4'' x 5.5''; Package weight: 2 lbs.
- 【WIDE APPLICATION】Handheld skiver, use for skiving edge, skiving thinner, segment skiving, entire piece skiving thinner. Fit for soft leather, hard leather, high-density leather. Applicable for home, tailor, factory, ect.
- 【BLADE INSTALLATION】Use a hex wrench to remove the fixing screws of blade clamp; Insert into the blade; Tighten the fixing screws; Viewed from the front,the relative position of the blade and rollers should be parallel.
- 【SKIVING OPERATION】According to the thickness of the skiving, adjustment the screw of the handle; Open the handle, ut the leather between the roller and the blade; The position of the leather should be in the middle of the roller, the tablet can make the leather press against the surface of the roller; The right hand clenched the handle, pull to the right.
Leather Craft Edge Skiving Tool Aluminum Leather Splitter Paring Peeler Machine
- ★ Features: This edge skiving tool equipped with 4 different sizes of rollers to choose from, in order to get different peeling width.
- ★ Adjustable: Adjust the roller height up and down easily, can reach a different thickness of the thinning thickness.
- ★ Material: This leather splitter machine is made of high quality aluminum material, anti-corrosion, strong and sturdy, durable in use.
- ★ Convenient to Use: The machine adopts traditional double-sided blade or three-hole industrial blade, which is convenient to replace.
- ★ Practical Tool: It is practical and strong, low maintenance costs, simple operation.
Manual Leather Thinning Machine Splitter Leather Craft Edge Skiving Machine Craft Paring Tool Leather Tool Paring Device kit
- 【Simplicity】Easy to operate,everyone can use.This machine can be used without self-assembly and repeated sharpening.
- 【High Quality & Durable】The fuselage is made of stainless steel，Keep sharp, rugged and durable. Adjustable thickness
- 【Hand Made】This machine is the whole manual work, you need to pull the skin material can be peeled, suitable for plant leather tanned leather.
- 【Good stability】it allows the paring of leather to become quite easy，precise structure much increases the accuracy of paring.
- 【Note】This machine is only suitable for the width of 0.1mm-5mm plant leather tanning leather thinning, not suitable for ultra-soft skin thinning.
ZONEPACK Manual Leather Skiver Leather Paring Device Machine Hand Leather Peel Tool Vegetable Tanned Leather Peeler (Green)
- This machine is a simple device without complicated mechanisms or motors .Leather paring device kit, max 35mm width each time, the length no limited, cutting thickness no limited
- Ability to par larger pieces of leather by running through the machine several times. * 3 additional interchangeable rollers (4mm, 8mm and 12mm)
- ZONEPACK product with one year warranty, any questions, please feel free to contact our after sales team.
- Convenient: no need to assemble, you can just use it when you receive it, and no need to grind the blade, which is a common shaver blade, can get it easily from your local shop
- Well stability: precise structure much increases the accuracy of paring, it is stable and less effort during the skiving.It turns the paring of leather into a simple routine. It even makes it possible to pare leather for high precision demands, for instance leather on-lays. Suitable for flat skiving and beveled edges.
LuckyHigh Leather Skiver Leather Splitter Manual Leather Paring Machine Leather Edge Skiving Machine with Extra Blades
- Manual Leather Skiver is made of stainless steel with advanced structure, high peeling precision.
- The leather skiver blade width is 35mm, so it fits for any length leather which width is less than 35mm.
- This leather paring machine is with 3 roller cylinders of different widths -4mm, 8mm and 12mm to make it pare narrow pieces.
- You can use the leather splitter as soon as you receive it. Don't need to assemble the paring machine, and even not need to grind the blade, which is easy to replace.
- The leather paring machine is suitable for all kinds of leather materials, such as hard leather, tanned leather, sheepskin, etc, and can pare around the edges of square leather pieces or entire leather strips to make the leather material thin and different angle.
Manual Leather Splitter, Leather Splitter Leather Skiver Peeler Leather Tool Paring Device Kit DIY Peeling Machine Shovel Skin Machine (White)
- 【High Quality & Durable】Stainless Steel，Keep sharp, rugged and durable for years of trouble-free performance.
- 【Precision Cutting】Wooden crank, sharpe blade, firm clamp, You'll get the thickness you want.
- 【Attention】This machine is only suitable for the width of less than 10cm plant leather tanning leather thinning, not suitable for ultra-soft skin thinning.
- 【Hand Made】This machine is the whole manual work, you need to pull the skin material can be peeled, suitable for plant leather tanned leather.Cutting thickness can be adjusted,stainless steel shaft to ensure that the cortex cut flat,can be repeatedly cut to the desired thickness.
- ▲【Warranty】Worry-free 24-Month.Ship from USA .If you have any question about the product ,we support 24x7 hours prompt customer service