You might be planning on getting the best MOTORCYCLE STANDS. Everyone loves products that prove to be invaluable investments. Check out our list of Top 10 best MOTORCYCLE STANDS here.
10 Best MOTORCYCLE STANDS
Best MOTORCYCLE STANDS
DOS ON Motorcycle Dirt Bike Lift Stand - 330 Lbs Heavy Duty Adjustable Steel Motorcycle Lift Repair Stand Dirt Bike Maintenance Table Rack
- PREMIUM MATERIAL - Constructed from solid high-grade steel with anti-rust powder coating, a superior strong and sturdy platform for bike maintenance and storage.
- HEIGHT ADJUSTABLE - The height of deck is fully adjustable, which allows easy and controlled lifting of your offroad motorcycle. Adjustable range: 25.2 cm (9.92 in) - 46 cm (18.11 in). The adjustable top plate is secured with a lock nut to ensure safety.
- NON SLIPPING - With a durable anti-slip rubber pad on the top surface, it effectively prevent bike from slippage, rust and corrosion resistant; Also the deck is fixed with a lock nut for safety ensurance.
- SAFE DESIGN - The repair table is designed with large lever to help lift heavy-load motorbikes with ease, while lead to avoidance of pinched fingers and strained shoulders.
- EASY TO USE - Use damper shock to control the descent of the motorcycle; Widened top surface helps lift both wheels off of the ground to better maintain, repair and store. Maximum lifting weight is 150 kg (330 lbs); Top plate size: 28 cm (11 in) *17.5 cm (6.9 in).
Orion Motor Tech Dilated Scissor Lift Jack for Street Bike, Cruiser, Adventure Touring Motorcycle
- REINFORCED LIFT CAPACITY：With a hefty lift capacity of 1200 lb and dynamic lift height range from 3 3/4" to 13 2/5", it can be used to lift street bikes, cruiser bikes, and adventure touring motorcycles. It will not fit snowmobiles, ATVs, UTVs, or dirt bikes.
- DURABLE CONSTRUCTION: Heavy-duty steel body and steel sleeve with easy-adjusting lift height. The durable red coating is highly resistant to oil, grease, and dirt.
- XL DECK: The extra-wide top platform of 9.8” x 15.8” provides a large contact area for better balance and support to your motorcycles, so you can find the bike’s center of gravity without the hassle.
- NON-SLIP DECK & GLOVES: The lift deck is padded with premium rubber for extra durability and stability. Protective gloves are included for your safety. Manufactured and tested to meet all current safety standards.
- NOTE: Avoid using an impact wrench - improper use may cause damage to the nut. Lift your motorcycle easily by rotating the metal sleeve, please refer to the instructions.
SPECSTAR Heavy Duty Motorcycle Front Rear Wheels Lift Universal Sport Bike Swingarm Spool Paddock Stand Combo for Suzuki Yamaha Honda Kawasaki
- MULTIPLE USES – The motorcycle front & rear wheel lift stand can be used together or separately; By supporting the vehicle, it makes it easy for people to clean and maintain their bikes at home or in repair shops
- PREMIUM MATERIALS – Made of high-quality steel with a black powder coated finish, they will not rust and are durable enough for lifetime use; Purchase once, use for a lifetime
- EASY ASSEMBLY – Easy to assemble and disassemble, it is the ideal and necessary tool for racetrack and road motorcycles; With 4 roll wheels, moving the vehicle gets easier, saving unnecessary effort
- SATY&RELIABLE – With a capacity of 440lbs each, it is stable and safe enough to lift up the front and rear wheels of your vehicle for easy maintenance and repair situations
- EXCELLENT DESIGN – It is suitable for most bikes and motorcycles due to the adjustable design, allowing you to adjust the stand for different occasions
MOTO4U Motorcycle Sports Bike Stand Rear Wheel Swingarm Spool Lift Stand Paddock Stands Universal For Sportbike Fits for Honda Yamaha Suzuki Kawasaki
- Great for tire removal, changes, maintenance and cleaning
- Application : For Yamaha Honda Kawasaki Suzuki Superbike
- The width of the stand can be adjusted simply by turning the knob. Equipped with a large knob that is easy to operate even when wearing gloves.
- There are four larger casters, you can lift the bike lightly and smoothly.
- Includes:1 Rear stand
Extreme Max 5001.5010 Standard Motorcycle Wheel Chock - Black
6 used from $29.16
- Solid front cross bar and boot provide maximum stability
- Durable steel and textured semi-gloss black powdercoat provide heavy duty strength and good looks
- Multiple rear wheel cradle adjustments fit wheels perfectly
- Designed to hold 17" - 21" wheels between 3-5/32" - 7-3/32" wide
- Easy bolt-together assembly
MaxxHaul 70271 Adjustable Motorcycle Wheel Chock Stand Heavy Duty 1800lb Weight Capacity
4 used from $58.82
- Capacity: 1,800 pounds
- Accommodates most wheels 3 to 5 inches wide
- Heavy duty steel construction; Black powder coat finish to resist rust and corrosion
- Self-locking wheel cradle utilizes bike weight to keep itself upright
- Anchor points for added stability
Motorcycle Jack Dirt Bike Stand - Adjustable Lift Hoist Table Height Lifting Stand
3 used from $51.51
- Fully adjustable deck height allows fit for most bikes. Adjustable range: 25.2 cm (9.92 in) - 46 cm (18.11 in). The adjustable top plate is secured with a lock nut to ensure safety.
- Maximum lifting weight is 150 kg (330 lbs); Top plate size: 28 cm (11 in) *17.5 cm (6.9 in).Allows easy and controlled lifting of your off-road motorcycle
- This Motorcycle Jack Is Easy to assemble. The safety pin is connected to the arm so that it won't get lost.
- Made of solid steel. The durable anti-slip pad helps prevent bike slippage.
- The Dirt Bike Stand is delivered directly to the United States and arrives within 7-10 days.
Apextreme 1100 LB Motorcycle Lift Center Scissor Lift Jack Wide Flat Hoist Stand Bikes ATVs Garage Repair Stand
- [SOLID CONSTRUCTING & RUST PREVENTION] - Solid steel construction in black powder coated finish which is for oil-resistant, grease-resistant and dirt-resistant. Galvanized treatment accessories to prevent rust.
- [NON-SLIP DESIGN] - Wide top surface desk design with a durable rubber pad which has striped veins to prevent slippage and scratching.
- [WIDE APPLICATION] - The lift fits most motorcycle models including cruiser bikes, street bikes, adventure touring motorcycles, etc.
- [OPERATE SIMPLY] - Come with a free Galvanized Crank Handle which is very easy to operate. Just rotating the metal sleeve to lift your motorcycle easily, a really excellent helper for motorcycle repair.
- [DIMENSIONS & LOAD-BEARING] - Lift range: 3-3/4 in. to 14-4/5 in. Platform dimensions: 14.6'' x 9''. Weight Capacity: 1100 lbs.
Apextreme Motorcycle Stand 750LB Sport Bike Rear Wheel Lift Swingarm Paddock Stands
- [Durable & Sturdy] High Grade Steel Construction with high gloss red finish, Oil resistance, dirt resistance, durable, not easy to be damaged.
- [Widely used] Professional adjustable design suitable for most motorcycles, eg. Yamaha, Honda, Kawasaki, Suzuki, Ducati, BMW.（Before placing an order, please check the specific width and other information identified in the picture）
- [Stability display] The base has four wheels, and the joints are strengthened by welding to improve stability and reduce shaking.
- [Application performance] Lift and keep the entire bike completely, change a tire at home or do the maintenance.
- [Simple Assembly] It is easily assembled under the guidance of the instructions without any helps.
Mx Dirt Bike Lift Stand - Motorcycle Stands and Lifts Jack Repair Stand Adjustable For K.T.M 125 250
- The MX lift stand Fully adjustable deck height allows fit for most bikes. Adjustable range: 29 cm (11.4 in) - 40.5 cm (15.9 in)
- This dirt bike repair stand is designed for holding up a dirt bike / motorcycle etc for service or storage
- The dirt bike jack stand allows easy and controlled lifting of your off-road motorcycle
- The Maximum lifting weight is 158 kg (350 lbs); Top plate size: 29 cm (11.4 in) *17.5 cm (6.9 in).
- The MX lift stand is made of solid steel, strong and stable. The durable anti-slip rubber pad helps prevent bike from slippage, rust and corrosion resistant